2022年（論文）
当分野の常勤医局員が第一著者または連絡著者である論文
1) Tianbo TAN, Qian ZHAO, Hiroyuki KUWAE, Takeshi UENO(C), Peng CHEN, Yusuke TSUTSUMI, Jun MIZUNO, Takao HANAWA, Noriyuki WAKABAYASHI.
Surface properties and biocompatibility of sandblasted and acid-etched titanium–zirconium binary alloys with various compositions.
SLA処理したTi-Zr合金の表面特性と生体親和性
Dental Materials Journal. 2022. 41(2), 266-72.
IF:2.102
2) Keiichiro UCHIKURA, Natsuko MURAKAMI(C), Toshiki YAMAZAKI, Huaxin LYU, Kohji NAGATA, Masahiro ONA, Naohiko IWASAKI, Hidekazu TAKAHASHI, Noriyuki WAKABAYASHI.
Fracture resistance of CAD/CAM restorative materials in mismatched removable partial denture rests: an in vitro experimental and finite element analysis
部分床義歯のレストとレストシートの接触状態の違いにおける歯冠修復材料の破壊抵抗性の検討
Dental Materials Journal (2022, in press)
IF:2.102
3) Kosuke Nozaki, Akiko Nagai, Takayuki Endo, Kazuaki Hashimoto, Kimihiro Yamashita.
Electrical polarization and ionic conduction properties of β-tricalcium phosphate bioceramics with controlled vacancies by sodium ion substitution
ナトリウムイオンの固溶により空孔制御したβ-TCPの電気分極とイオン電導特性
Ceramics International. 2022. 48(11), 15791-9.
IF: 4.527
4) Kensuke Takakusaki, Natsuko Murakami(C), Junichiro Wada, Taihei Kasai, Hitomi Matsuno, Toshiki Yamazaki, Naohiko Iwasaki, Masaru Yatabe, Hidekazu Takahashi, Noriyuki Wakabayashi.
Effect of retention hole designs in artificial teeth on failure resistance of the connection with thermoplastic resin
人工歯の保持孔形態が義歯床用熱可塑性樹脂との結合力に与える影響
Dental Materials Journal (2022, in press)
IF:2.102
5) Mahmoud E Elbashti(C), Amel Aswehlee, Marwa Abdel Rahman, Yuka I Sumita, Michael M Bornstein, Martin Schimmel, Samir Abou-Ayash, Pedro Molinero-Mourelle.
Triangular mesh reduction of digitized maxillectomy defects for prosthetic rehabilitation: A 3D deviation study
上顎切除欠損症例における三角メッシュの削減が補綴治療に与える影響 3次元偏差に関する研究
Journal of Dentistry. 2022(Online ahead of print).
10) Chie Watanabe, Junichiro Wada (C), Koji Mizutani, Tomiharu Nagayama, Hirofumi Uchida, Yo Shibata, Noriyuki Wakabayashi.
Radiographic predictive factors for 10-year survival of removable partial denture abutment teeth: alveolar bone level and density,
部分床義歯支台歯の10年生存に対するエックス線写真上での予測因子：歯槽骨レベルと骨密度
Journal of Prosthodontic Research, 2022. Online ahead of print.
IF: 4.642
11) Junichiro Wada (C), Kanae Wada, Mona Gibreel, Noriyuki Wakabayashi, Tsutomu Iwamoto, Pekka K. Vallittu, Lippo Lassila.
Effect of 3D printer type and use of protection gas during post-curing on some physical properties of soft occlusal splint material,
3Dプリンターの種類と後処理中の保護用ガス使用がソフトタイプのオクルーザルスプリント材料の物性に及ぼす影響
Polymers. 2022; 14(21): 4618.
IF: 4.967
12) Abdullah KAMEL, Toshiki YAMAZAKI, Natsuko MURAKAMI, Huaxin LYU, Kohei KOMINE, Amr BADR, Gehan FEKRY, Hidekazu TAKAHASHI, Noriyuki WAKABAYASHI
Retentive force of a conical crown with CAD/CAM-fabricated PEEK and zirconia secondary crowns on titanium implant abutments
インプラントアバットメントにジルコニアおよびPEEKで製作されたCAD/CAMコーヌステレスコープ外冠の維持力評価
Dental Materials Journal (2023, in press)
IF:2.418
13） Amr Mohamed, Atsushi Takaichi, Yuka Kajima, Hidekazu Takahashi, Noriyuki Wakabayashi
Bond strength of CAD/CAM denture teeth to a denture base resin in a milled monolithic unit
CAD/CAM技術を用いて人工歯と義歯床を一体で造形した際の接着強さの評価
J Prosthodont Res. 2022 (online ahead of print)
IF:4.642
14) Eung-Yeol Kim, Junichiro Wada (C), Kazuki Sakamoto, Yurika Ishioka, Yuki, Arai, Natsuko Murakami, Toshiki Yamazaki, Hironari Hayama, Miona Utsumi, Shunsuke Inukai, Noriyuki Wakabayashi.
Effect of scanning origin location on data accuracy of abutment teeth region in digital impression acquired using intraoral scanner for removable partial denture: a preliminary in vitro study,
スキャン開始点の位置が口腔内スキャナで採得した部分床義歯のためのデジタル印象における支台歯領域のデータ正確度に及ぼす影響：予備的インビトロ研究
Journal of Clinical Medicine. 2022; 11(24): 7392.
IF:4.964
Surface properties and biocompatibility of sandblasted and acid-etched titanium–zirconium binary alloys with various compositions.
SLA処理したTi-Zr合金の表面特性と生体親和性
Dental Materials Journal. 2022. 41(2), 266-72.
IF:2.102
2) Keiichiro UCHIKURA, Natsuko MURAKAMI(C), Toshiki YAMAZAKI, Huaxin LYU, Kohji NAGATA, Masahiro ONA, Naohiko IWASAKI, Hidekazu TAKAHASHI, Noriyuki WAKABAYASHI.
Fracture resistance of CAD/CAM restorative materials in mismatched removable partial denture rests: an in vitro experimental and finite element analysis
部分床義歯のレストとレストシートの接触状態の違いにおける歯冠修復材料の破壊抵抗性の検討
Dental Materials Journal (2022, in press)
IF:2.102
3) Kosuke Nozaki, Akiko Nagai, Takayuki Endo, Kazuaki Hashimoto, Kimihiro Yamashita.
Electrical polarization and ionic conduction properties of β-tricalcium phosphate bioceramics with controlled vacancies by sodium ion substitution
ナトリウムイオンの固溶により空孔制御したβ-TCPの電気分極とイオン電導特性
Ceramics International. 2022. 48(11), 15791-9.
IF: 4.527
4) Kensuke Takakusaki, Natsuko Murakami(C), Junichiro Wada, Taihei Kasai, Hitomi Matsuno, Toshiki Yamazaki, Naohiko Iwasaki, Masaru Yatabe, Hidekazu Takahashi, Noriyuki Wakabayashi.
Effect of retention hole designs in artificial teeth on failure resistance of the connection with thermoplastic resin
人工歯の保持孔形態が義歯床用熱可塑性樹脂との結合力に与える影響
Dental Materials Journal (2022, in press)
IF:2.102
5) Mahmoud E Elbashti(C), Amel Aswehlee, Marwa Abdel Rahman, Yuka I Sumita, Michael M Bornstein, Martin Schimmel, Samir Abou-Ayash, Pedro Molinero-Mourelle.
Triangular mesh reduction of digitized maxillectomy defects for prosthetic rehabilitation: A 3D deviation study
上顎切除欠損症例における三角メッシュの削減が補綴治療に与える影響 3次元偏差に関する研究
Journal of Dentistry. 2022(Online ahead of print).
IF: 4.379
6) Huaxin Lyu, Natsuko Murakami (C), Toshiki Yamazaki, Junichiro Wada, Miona Utsumi,Noriyuki Wakabayashi
Evaluation of PEEK and zirconia occlusal rest designs for removable partial dentures based on finite element analysis
有限要素解析に基づくPEEK及びジルコニアの咬合面レストの設計評価
J Prosthodont Res. 2022 (online ahead of print)
IF:4.642
7) Yuka Kajima, Atsushi Takaichi（C）, Hein Linn Htata, Takao Hanawa, Noriyuki Wakabayashi
Recrystallization behavior of selective laser melted Co–Cr–Mo alloys with several heat treatment times,
レーザー積層造形法により製作したCoCrMo合金の再結晶現象におよぼす熱処理時間の影響
Materials Science and Engineering: A, Volume 856, 2022
IF:6．044
8) Junichiro Wada (C), Kanae Wada, Mona Gibreel, Noriyuki Wakabayashi, Tsutomu Iwamoto, Pekka K Vallittu, Lippo Lassila
Effect of Nitrogen Gas Post-Curing and Printer Type on the Mechanical Properties of 3D-Printed Hard Occlusal Splint Material,
窒素雰囲気下での後処理が３Dプリンター用ハードスプリント材料の物性におよぼす影響
Polymers 2022;14(19):3971.
IF: 4.967
9) Qian Zhao, Takeshi Ueno(C), Peng Chen, Kosuke Nozaki, Tianbo Tan, Takao Hanawa, Noriyuki Wakabayashi,
Fabrication of micro-/submicro-/nanostructured surfaces on Ti–Zr alloy by varying H2SO4/H2O2 treatment conditions and investigations of fundamental properties of a typical surface,
硫酸/過酸化水素によるチタン-ジルコニウム合金表面のマイクロ/サブマイクロ/ナノ構造の作製と表面特性解析
Surfaces and Interfaces, Volume 34, 2022, 102390.
IF: 6.137
6) Huaxin Lyu, Natsuko Murakami (C), Toshiki Yamazaki, Junichiro Wada, Miona Utsumi,Noriyuki Wakabayashi
Evaluation of PEEK and zirconia occlusal rest designs for removable partial dentures based on finite element analysis
有限要素解析に基づくPEEK及びジルコニアの咬合面レストの設計評価
J Prosthodont Res. 2022 (online ahead of print)
IF:4.642
7) Yuka Kajima, Atsushi Takaichi（C）, Hein Linn Htata, Takao Hanawa, Noriyuki Wakabayashi
Recrystallization behavior of selective laser melted Co–Cr–Mo alloys with several heat treatment times,
レーザー積層造形法により製作したCoCrMo合金の再結晶現象におよぼす熱処理時間の影響
Materials Science and Engineering: A, Volume 856, 2022
IF:6．044
8) Junichiro Wada (C), Kanae Wada, Mona Gibreel, Noriyuki Wakabayashi, Tsutomu Iwamoto, Pekka K Vallittu, Lippo Lassila
Effect of Nitrogen Gas Post-Curing and Printer Type on the Mechanical Properties of 3D-Printed Hard Occlusal Splint Material,
窒素雰囲気下での後処理が３Dプリンター用ハードスプリント材料の物性におよぼす影響
Polymers 2022;14(19):3971.
IF: 4.967
9) Qian Zhao, Takeshi Ueno(C), Peng Chen, Kosuke Nozaki, Tianbo Tan, Takao Hanawa, Noriyuki Wakabayashi,
Fabrication of micro-/submicro-/nanostructured surfaces on Ti–Zr alloy by varying H2SO4/H2O2 treatment conditions and investigations of fundamental properties of a typical surface,
硫酸/過酸化水素によるチタン-ジルコニウム合金表面のマイクロ/サブマイクロ/ナノ構造の作製と表面特性解析
Surfaces and Interfaces, Volume 34, 2022, 102390.
IF: 6.137
10) Chie Watanabe, Junichiro Wada (C), Koji Mizutani, Tomiharu Nagayama, Hirofumi Uchida, Yo Shibata, Noriyuki Wakabayashi.
Radiographic predictive factors for 10-year survival of removable partial denture abutment teeth: alveolar bone level and density,
部分床義歯支台歯の10年生存に対するエックス線写真上での予測因子：歯槽骨レベルと骨密度
Journal of Prosthodontic Research, 2022. Online ahead of print.
IF: 4.642
11) Junichiro Wada (C), Kanae Wada, Mona Gibreel, Noriyuki Wakabayashi, Tsutomu Iwamoto, Pekka K. Vallittu, Lippo Lassila.
Effect of 3D printer type and use of protection gas during post-curing on some physical properties of soft occlusal splint material,
3Dプリンターの種類と後処理中の保護用ガス使用がソフトタイプのオクルーザルスプリント材料の物性に及ぼす影響
Polymers. 2022; 14(21): 4618.
IF: 4.967
12) Abdullah KAMEL, Toshiki YAMAZAKI, Natsuko MURAKAMI, Huaxin LYU, Kohei KOMINE, Amr BADR, Gehan FEKRY, Hidekazu TAKAHASHI, Noriyuki WAKABAYASHI
Retentive force of a conical crown with CAD/CAM-fabricated PEEK and zirconia secondary crowns on titanium implant abutments
インプラントアバットメントにジルコニアおよびPEEKで製作されたCAD/CAMコーヌステレスコープ外冠の維持力評価
Dental Materials Journal (2023, in press)
IF:2.418
13） Amr Mohamed, Atsushi Takaichi, Yuka Kajima, Hidekazu Takahashi, Noriyuki Wakabayashi
Bond strength of CAD/CAM denture teeth to a denture base resin in a milled monolithic unit
CAD/CAM技術を用いて人工歯と義歯床を一体で造形した際の接着強さの評価
J Prosthodont Res. 2022 (online ahead of print)
IF:4.642
14) Eung-Yeol Kim, Junichiro Wada (C), Kazuki Sakamoto, Yurika Ishioka, Yuki, Arai, Natsuko Murakami, Toshiki Yamazaki, Hironari Hayama, Miona Utsumi, Shunsuke Inukai, Noriyuki Wakabayashi.
Effect of scanning origin location on data accuracy of abutment teeth region in digital impression acquired using intraoral scanner for removable partial denture: a preliminary in vitro study,
スキャン開始点の位置が口腔内スキャナで採得した部分床義歯のためのデジタル印象における支台歯領域のデータ正確度に及ぼす影響：予備的インビトロ研究
Journal of Clinical Medicine. 2022; 11(24): 7392.
IF:4.964
当分野の常勤医局員が共著者である論文
1）Inhibitory effect of 405-nm blue LED light on the growth of Candida albicans and Streptococcus mutans dual-species biofilms on denture base resin. Chiaki Tsutsumi-Arai, Yuki Arai, Chika Terada-Ito, Takahiro Imamura, Seiko Tatehara, Shinji Ide, Jumpei Shirakawa, Noriyuki Wakabayashi & Kazuhito Satomura.
405nm LED光のC.albicansとS.mutants混合バイオ
Lasers Med Sci (2022)
IF:3.161
2) Fostering globally competent dental students through virtual team-working, problem-solving and person-centred multi-disciplinary care planning. Yuna Kanamori, Naoko Seki, Richard Foxton, Janelle Moross, Yuriko Komagamine, Koji Mizutani, Keiichi Hosaka, Manabu Kanazawa, Takashi Hatayama, Wataru Komada, Ikuo Yonemitsu, Masako Akiyama, Paramaporn Chiewpattanakul Kaewmanee, Nathawut Kaewsutha, Hiroshi Nitta, Noriyuki Wakabayashi, Ikuko Morio.
国際性を有する歯科学生の育成を目指したチーム，課題解決，学生者主体を基本とする多職種診療計画立案のヴァーチャル学習
Journal of Dental Sciences (2022,Available online)
IF:2.08